Looking for a reliable heat cycle testing lab in Chennai? Kiyo R&D Lab offers precision heat cycle testing services for automotive electronics, PCBs, and solder joints — using gradual, controlled-rate temperature ramping in a single chamber, tested to IEC, ISO, and AEC-Q100 standards.
Heat cycle testing repeatedly ramps a specimen between hot and cold temperature extremes at a controlled, specified rate — within a single chamber — to reveal fatigue failures, solder joint cracking, and connection degradation caused by repeated thermal expansion and contraction. Searching for a heat cycle testing lab in Chennai you can trust? As an IEC/ISO/AEC-Q100-compliant heat cycle testing lab in Chennai, Kiyo R&D Lab helps automotive electronics, PCB, and battery manufacturers validate reliability against real-world temperature fluctuation over the product’s service life.
Our thermal cycling testing Chennai manufacturers rely on ramps temperature at a controlled rate per IEC 60068-2-14 (Nb).
Automotive electronics cycling test validates ECUs and sensors per ISO 16750-4.
Our semiconductor cycling test lab service validates devices per AEC-Q100.
Battery thermal cycling Chennai manufacturers use to validate battery pack performance across temperature swings.
Our solder joint reliability testing service evaluates PCB solder joint durability per IPC-9701.
We support GMW3172 testing and other OEM-specific thermal cycling programs.
Single-chamber programmable temperature system — calibrated to IEC/ISO/AEC-Q100 reference standards before every batch.
Every heat cycle testing service at our Chennai laboratory — from IEC 60068-2-14 Nb testing to ISO 16750-4 testing — is performed against internationally recognized standards, ensuring your reports are accepted by OEMs, auditors, and regulatory bodies. As an AEC-Q100 testing lab, we cover automotive electronics, PCBs, and batteries end to end.
| Standard | What It Covers | Typical Use |
|---|---|---|
| IEC 60068-2-14 (Nb) | Change of temperature, specified rate | General component qualification |
| ISO 16750-4 | Road vehicle climatic environmental testing | Automotive electronics |
| AEC-Q100 | Automotive electronics stress test qualification | Automotive semiconductors |
| IPC-9701 | Solder joint reliability performance test methods | PCB & solder joint reliability |
| GMW3172 | General Motors component thermal cycling | GM supplier compliance |
| IS 13360 (Part 5) | Indian standard for thermal cycling | Domestic OEM compliance |
Our heat cycle testing lab in Chennai runs samples on a single-chamber programmable temperature system, giving precise controlled-rate ramp and dwell control for every test we deliver.
Share your component and applicable standard via call, WhatsApp, or email.
Get an itemised quote for your heat cycle testing requirement within hours.
Calibrated single-chamber instrumentation cycles your sample per the chosen IEC/ISO/AEC-Q100 standard.
Receive a detailed report with cycle counts and pass/fail analysis, referenced to the exact standard requested.
IEC/ISO/AEC-Q100-traceable calibration for every run — accurate ramp-rate data you can rely on.
Quick scheduling for urgent heat cycle testing requirements in Chennai.
Skilled test engineers interpreting every cycle report and failure analysis.
Heat cycle testing Chitlapakkam headquarters, plus Chrompet & Oragadam locations across Chennai.
Upfront, itemised quotations — no hidden costs.
IEC, ISO, AEC-Q100, IPC & OEM-specific heat cycle test methods supported.
Our heat cycle testing lab in Chennai serves automotive electronics, PCB, and battery manufacturers with convenient sample pickup and drop-off from these areas.
Convenient sample drop-off for Chrompet-based electronics manufacturers.
Serving Oragadam’s automotive OEM and Tier-1/2 supplier cluster with fast turnaround.
Heat cycle testing is one part of our full materials testing capability in Chennai. Explore related services below.
Fill the enquiry form below or call us directly — our team responds to every heat cycle testing lab in Chennai enquiry within one business day.
Fills your request and emails it straight to kiyo@kiyorndlab.com
Yes — Thermal Shock testing uses a rapid dual-chamber shuttle system, transitioning temperature within seconds. This page covers gradual, controlled-rate cycling within a single chamber (typically 0.5–5°C/min), a fundamentally gentler and more representative stress for many electronics and automotive qualification standards.
Yes — both pages mention thermal cycling briefly as one of several environmental tests. This page is our dedicated, in-depth heat cycle testing service, covering controlled-rate ramping per IEC 60068-2-14 (Nb), ISO 16750-4, and AEC-Q100 in full detail.
We test automotive ECUs, sensors, PCBs, solder joints, and battery packs for thermal cycling durability.
Standard turnaround for heat cycle testing at our Chennai lab is 5–10 working days, depending on the required cycle count and ramp rate.
We test to IEC 60068-2-14 (Nb), ISO 16750-4, AEC-Q100, IPC-9701, GMW3172, and IS 13360, along with OEM-specific methods.
Call 90420 86986, message us on WhatsApp, or email kiyo@kiyorndlab.com with your component and standard requirement.
Yes — if you’re searching heat cycle testing near me, our Chitlapakkam HQ plus Chrompet and Oragadam branches put a heat cycle testing lab within reach across Chennai’s industrial corridor.
